Add to Cart
Production introduction:
1/3” Sony Color CCD&DSP
420/480/540 TV lines
Pan: 360degree non-stop; Tilt: 95degree preset speed: 0.5-45degree
128 Preset Points; 2 Auto- scan
Motorized Zoom lens, Control by keyboard or DVR
4-9/8-20mm (1.3 Mega-pixel); 5-15mm(2.0 Mega-Pixel)
Communication: RS485, PELCO-D/P Protocol
Illumination: 0.01lux
Detail specification:
【Video Output】: 1.0±0.2VP-P, 75Ω compound video signal
【(S/N)】:≥50dB
【Manual Speed】:(0.5°~50°/s)/ Vertical(0.5°~50°/s)
【Preset Speed】:50°/s
【Rotation】:Horizontal 360°endless rotation Vertical 0~92°with auto overturn
【Focus Speed auto-control】:control speed auto-adjusting according to the focal length
【Preset Positions】: 128 pieces
【Auto overturning】:Vertical 90°auto turning into 180°
【Auto scanning】:2 pieces, 1 auto scanning route and speed can be set
【Synchronization System】:Internal / External optional
【Communication Baud Rate】:1200/2400/4800/9600/bps
【Address Range】:1~127
【Video Output Interface】:BNC
【Remote Control】:RS485 twisted cable
【Environment Temperature】:-10℃~+50℃
【Environment Humidity】:0~95%(no congealing)
【International Protection】:24h protective housing, 3000V lighting-proof, surge voltage protective
【POWER】:DC 12V/50Hz 1.2A
【Dimension】:125×125(L×D)
【Weight】:1㎏(without bracket and adapter)
【casing】:transparent or semi-transparent
The intelligent dome set for multiple single board cameras: 420TVL, 480TVL, 520TVL, etc. For more info, please refer to
the specific camera.
The intelligent dome structures a new and compact body with fast heat yielding module. Its easy installation with black
case inside fulfills hidden monitoring. The body rotates flexibly with less noise and wider view shooting. The multiple automatic
functions capture excellent crisp images for clients.
This part mainly describes the leading function and common principle of the all in one intelligent dome camera. It does not
refer to the specific operational methods. Different systematical platforms have different methods. In some cases, special
requirement and operational method would exist, subject to the systematical manufacturer’s manual.
The control board of the dome has a 8-DIP-switch, used to set the address, communication and control protocols (refer to “DIP
switch set”) control protocol PELCOD. Any command should agree with the targeted camera address, and cameras only
response when the address around is the same..
Users can control the movement of the lens by rotate the keyboard rod from up to down, from left to right. They can also track the
target or shift the view. And, the focal length can be adjusted to fulfill the size of the view angle and the targeted image. In the
state of shortening auto focus and auto iris, as the lens rotates, the camera would adjust fast and automatically and capture crisp images according to the variable objects.
The technology of matching focal length with speed Manual adjusting the farther focal length when the speed dome moves at
a high speed, the image would move fast and info could be lost by rotating the rod. Based on human intelligent design, the speed
dome can adjust the horizontal and vertical speed in an automatic way, which simplifies the manual tracking target. Such function
can be realized by setting the “zoom” as “open” in the OSD menu.
User can adjust the image farther/nearer to get a panoramic view by controlling the keyboard rod “ ZOOM- / ZOOM+ ”. The speed dome supports both digital and optical vari-focus. Digital vari-focus can be set.
In the following cases, the camera’s target is unable to auto focus:
The function of preset positions is, temporarily storing such location parameter as horizontal angel / inclination / lens’ focus in a
memory and transferring them whenever theyre needed. User can quickly transfer the preset positions via the keyboard or
something else. The speed dome supports 127 preset points.
Automatic Cruise is internal set function, which insert the points and realize the automatic cruise among preset positions by
beforehand programming them in the cruise lists. The cruise order and pausing timing can be programmed and one cruise route
can store 8 points and timing.
Cameras would level scan back and forth among the left & right limits at the set speed via the keyboard and menu setting the left
and right limit well beforehand.
When correct or incorrect power-off happens, the camera would auto-protect the movement state before the power-off. After
power-on, the camera would auto-recover the former protected movement.
Key Features | ||||
●1/3" Sony Color CCD&DSP | ||||
●Pan: 360°non-stop; Tilt: 95°; Preset Speed: 0.5~45° | ||||
●128 Preset Points; 2 Auto-scan | ||||
●Motorized Zoom lens, Control by Keyboard or DVR | ||||
●4-9 / 8-20mm (1.3 Mega-Pixel); 5-15mm (2.0 Mega) | ||||
●Communication: RS485, PELCO-D / P Protocol | ||||
●Illumination: 0.01Lux |
Model No. | ES-DOME-M320 | ||||||
Image Sensor | 1/3” SONY SUPER HAD CCD | ||||||
Digital Singnal Processor | SONY DSP | ||||||
Signal System | PAL/NTSC | ||||||
Scanning System | 2:1 Interlace | ||||||
Scanning Frequency(H) | NTSC:15.734KHZ , PAL:15.625KHZ | ||||||
Sync. System | Internal | ||||||
Horizontal System | 540TVL | 420TVL | |||||
Effective Pixels (HxV) | PAL: 752×582 | PAL: 500×582 | |||||
NTSC: 768×494 | NTSC: 510×492 | ||||||
Shuttle Speed | PAL=1/50 ~1/100, 000 sec;NTSC=1/60 ~1/100, 000 sec | ||||||
Mini Illumination | 0.01 Lux | ||||||
S/N Ratio | > 48dB(Auto Gain Off) | ||||||
Gamma | 0.45 | ||||||
Lens | 4-9 / 8-20mm (1.3 Mega F1.8) 5-15mm (2.0Mega F2.0) | ||||||
Focus Mode | Auto | ||||||
White Balance | Auto | ||||||
BLC | Open | ||||||
Video Output | 1.0V P-P, 75Ω | ||||||
AGC | Auto | ||||||
Input/Output Connector | Power: 2 Pin Terminal/ RS-485: 2 Pin Circle Connector/ Video Output: 1 BNC Connector | ||||||
Operating Voltage | Super Wide Voltage (8V~18V) | ||||||
CCD board Consumption | 120mA | 80mA | |||||
Operating Temperature | -10 ~ 40℃(relative humidity:the most 95%) | ||||||
Dimention | 125×110mm |