ANSI Standard Single Plate Spring Loaded Wafer Check Valve
Single Plate Wafer Swing Check Valve, Spring Check Valve, NRV (ANSI Standard) Against the problem of traditional check valve, we accord AMERICA API&GERMNEY DIN, after study and research for many years, developed H76 lug body type wafer, double-disc swing type wafer check valve, H74 swing single-plate wafer check valve, H71 lift wafer check valve, and series of those products. Used in the industry of oil, petro, metallurgy, electric, light...
Spring Loaded Brass Check Valve 1/2-2 Inch Nontoxic Practical
1/2 Inch - 4 Inch Brass Spring Check Valve With Brass Core The rubber washer is made of imported raw material, long service life, and not easy to leak. Brass valve body, high-density forging, no blister, no air holes, no leakage.Made by special high precision CNC machines. Key features: Spring Check Valve Brass Body 316 Stainless Steel Plate & Spring Screwed BSP Sizes: 3/8" to 4" Temperature range: -20°C to 100°C Pressure: Up to 25 Bar Parameters...
Yuhuan Jiangting Valve Factory
Verified Supplier
No. 186, Nanxing East Road, Chumen Town, Yuhuan City, Zhejiang Province
Cast Steel Piston Check Valve Class150-1500 Spring Loaded Lift Disc Piston check valves are also called lift check valves. They are essentially globe valves without the stem and top works, allowing the disc to respond to flow rates and direction. The disc has linear movement and is typically body-guided with conical seating surfaces. Springs can be added above the disc to provide more closure force when the disc returns to its closed position....
Shanghai Kolink Valve Co., Ltd.
Verified Supplier
Room 368, No. 2, Lane 377, Tian Zhu Road, Shanghai, China
Wafer Type Lift Check Valve Stainless Steel Single-plate Verticle Flow
Wafer Type Lift Check Valve Stainless Steel Single-plate Verticle Flow Single-plate wafer check valves prevent reverse flow with disc movement that is parallel with the flow. With this design, the disc is always in the flow path. Discs are spring-loaded to assist in seating. These wafer type check valves are bonnetless and are installed between flanges. The type of check valve disc has very short disc travel and responds very quickly to flow...
Shanghai Kolink Valve Co., Ltd.
Verified Supplier
Room 368, No. 2, Lane 377, Tian Zhu Road, Shanghai, China
Cast steel disc non return lift double flange vertical check valves Lift Check Valve Introduction The lift check valve, also known as a lift non-return valve, is a widely used type of check valve that consists of a valve body, bonnet, piston, spring, seals, and other components. This valve operates by lifting the piston to open the valve when the fluid flows forward, allowing the fluid to pass through. However, when the fluid flows in reverse,...
Tilting Disc Wafer Check Valve Spring-loaded Non-return Valve Tilting disc check valves produce slightly more pressure drop than swing check valves of the same size. These check valves have a single-piece disc without a hinge. In response to flow forces, the disc pivots about hinge pins that are located within the geometry of the disc and slightly above the center-line of the valve body. Due to the disc rotating onto the seat, the sealing...
Shanghai Kolink Valve Co., Ltd.
Verified Supplier
Room 368, No. 2, Lane 377, Tian Zhu Road, Shanghai, China
API 6A Approved Lift Check Valve , Non Return Valve Size 2"-4" Easy To Operate
API 6A high pressure Lift Check Valve/Non Return Valve with size from 2"-4" for Inline Check Valve Lift check valve is often used in the oilfield when drilling, lift check valve is designed and manufactured in accordance with API 6A and API 16C standard. They are specifically made for mud, cement, fracturing and water service and are easy to operation and simple to maintain. We have many sizes and pressure ratings lift check valves used for...
CCSC Petroleum Equipment Limited Company
Verified Supplier
Room 717, 1088 xinjinqiao Road, Pudong new district, Shanghai, China
spring loaded wafer check valve
Whether your needs call for standard or custom valves, KCMteach Valve provides excellence in service and delivery. KCM TECHNOLOGY GROUP CO.,LTD Address: Bin Hai Economic Development Industrial Zone. WenZhou,ZheJiang Province,China Tel :+0086-577-86879200 Fax :+86-577-86918728 Phone :+86 13175600492 Skype :Andy YOU 229 Web:www.kcmtech-valve.com& www.andy-valve.com Email:admin@kcmtech-valve.com& sales@andy-valve.com Main products:Cast steel(iron)...
KCM TECHNOLOGY GROUP CO.,LTD
Bin Hai Economic Development Industrial Zone. WenZhou,ZheJiang Province,China
Spring Loaded Brass Check Valve 1/2-2 Inch Nontoxic Practical
1/2 Inch - 4 Inch Brass Spring Check Valve With Brass Core The rubber washer is made of imported raw material, long service life, and not easy to leak. Brass valve body, high-density forging, no blister, no air holes, no leakage.Made by special high precision CNC machines. Key features: Spring Check Valve Brass Body 316 Stainless Steel Plate & Spring Screwed BSP Sizes: 3/8" to 4" Temperature range: -20°C to 100°C Pressure: Up to 25 Bar Parameters...
Yuhuan Jiangting Valve Factory
No. 186, Nanxing East Road, Chumen Town, Yuhuan City, Zhejiang Province
Submit “spring loaded lift check valve” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!