Business license check OK
1 - 10 Results for electrical safety tester from 22593 Products
Electrical Safety Compliance Analyzer Electrical Safety Tester And Cable Tester
TH9130 Multifunction Safety Compliance Analyzer Electrical Safety Tester and Cable Tester Non-destructive Testing: The Winding Tester performs non-destructive testing, meaning it does not cause any damage to the windings during the measurement process. This makes it suitable for testing delicate or expensive components. Fast Testing Speed: Winding Testers are equipped with high-speed measurement capabilities, allowing for rapid testing of...
Changzhou Tonghui Electronic Co., Ltd,
Verified Supplier
No.1 Xinzhu Road, Xinbei District, Changzhou, Jiangsu, China
IEC 60335-1 5KVA Multimeter Electrical Safety Tester With 6 Functions
IEC 60335-1 5KVA Multimeter Electrical Safety Tester With 6 Functions Product Information For Multimeter Electrical Safety Tester: This multitester electrical safety tester Conforms to IEC 60598-1 clause 8.2.3, clause10.2.1, clause 10.2.2, IEC 60950:2013 clause 2.6.3.4, 5.2 and 6.2.2.3, IEC 60335-1 Clause 13, Clause 16, Clause 27 and etc. It integrates 6 functions of hi-pot, insulation, grounding, leakage, power, low-voltage start testing....
Sinuo Testing Equipment Co. , Limited
Verified Supplier
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
IEC 60884-1 Clause 11.5 Multimeter Electrical Safety Tester
IEC 60884-1 Clause 11.5 Multitester Electrical Safety Tester Product information: This multitester electrical safety tester Conforms to IEC 60884-1:2013 clause 11.5, 17.1, 17.2, IEC 60669-1 clause 11.4, clause 16, IEC 60950:2013 clause 2.6.3.4, 5.2 and 6.2.2.3, IEC 60335-1 Clause 10, 13, Clause 16, Clause 27 and etc. It integrates 6 functions of hi-pot, insulation, grounding, leakage, power, low-voltage start testing. Features: ■ Meet CCC, IEC,...
Sinuo Testing Equipment Co. , Limited
Verified Supplier
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
IEC 62368-1 Clause 5.4.5.2 Electrical Safety Tester
IEC 62368-1 Clause 5.4.5.2 Electrical Safety Tester Product information: ■The electrical safety tester conforms to IEC 62368-1 Clause 5.3.2, 5.4.5.2, the CCC,IEC,EN,VDE,BS,GS,UL etc. requirements of general electrical safety standards. ■5.7 LCD display with blue background, displaying data are intuitive and clear. ■Up to 200 groups of test conditions are memorized, each group has 8 test steps, and each group can be individually set for...
Sinuo Testing Equipment Co. , Limited
Verified Supplier
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
12 Channels Potential Equalization Electrical Safety Tester IEC 61851 Electric Vehicle
12 Channels Potential Equalization Electrical Safety Testing Equipment Complied Standards & Clauses IEC 61851 Electric vehicle conductive charging system IEC 60335 Household and similar electrical appliances IEC60598 Luminaires-Part 1: General requirements and test IEC60950 Information technology equipment ... Equipment Overview 1. It can test the connection resistance between all exposed conductive parts and the electric platform; the...
Sinuo Testing Equipment Co. , Limited
Verified Supplier
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
IEC 60335-2-15:22.106 Electrical Safety Tester For Kettle Plug / Pull Out
IEC 60335-2-15:22.106 Electric Kettle Plug And Pull Out Life Test Machine Function overview: This equipment shall test the structure of the electric kettle coupling according to clause IEC 60335-2-15:22.106 and clauses 19 and 22 of GB4706.19-1999.According to the standard requirements, the pot should be placed on the base at 10 frequency per minute, and pulled out 10,000 times to detect the reliability of the structure. Special, point: The test...
KingPo Technology Development Limited
Verified Supplier
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
IEC60335-1 Clause 21.2 Electric Safety Tester For Solid Insulation Accessible Parts
IEC 60335-1 clause 21.2 Electric strength test instrument for Accessible parts of solid insulation 21.2 Accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements. Compliance is checked by subjecting the insulation to the following test, unless the thickness of supplementary insulation is at least 1 mm and that of reinforced insulation is at least 2 mm. The insulation is raised to the temperatur...
KingPo Technology Development Limited
Verified Supplier
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Hipot Electrical Safety Tester High Voltage Floating Output EN50191 Compliant
Safety Hipot Tester TH9110/TH9110A: High-Voltage Floating Output Design, EN50191 Compliant Multiple Test Points: Hipot Testers often provide multiple test points or terminals, allowing for simultaneous testing of multiple components or conductors. This feature enhances testing efficiency, especially in production environments where batch testing is required. Features High power: AC 5kV / 100mA / 500VA output High security: High-voltage floating...
Changzhou Tonghui Electronic Co., Ltd,
Verified Supplier
No.1 Xinzhu Road, Xinbei District, Changzhou, Jiangsu, China
Custom Electric Socket Tester Stable Performance High Safety Standard
Electric Socket Tester safety Instrument Electric Outlet Receptacle Tester Features of Electric Socket Tester AU socket testersafety instrument Electric Outlet Receptacle Tester Tester PM6860CR Comply with international safety standards CATII 600V IEC1010-1 Designed for easy testing of 220V sockets Clear display socket line status: Zero line and the line of fire Grounding and firing line Simple and intuitive test Lack of ground Lack of zero line...
Guilin Huayi Peakmeter Technology Co., Ltd.
Verified Supplier
No. 15-3 Xingyuan Road, Sitang Town Lingui District, Guilin 541199，China
Alarming Function Electrical Safety Test Equipment 5~32A 10~600mΩ Earth Resistance Tester
Precision Earth Resistance Tester Electrical Safety Test Equipment 5~32A/10~600mΩ 1. Introduction Ground Resistance tester (earth resistance tester) is applied to test the ground resistance between conductive parts and earth terminal. Ground resistance is one of important index of safety performance of various electrical equipment. It measures the resistance of the ground loop at a high current (like 10A, 25A or 70A), and also tests the ground...
Pego Electronics (Yi Chun) Company Limited
Verified Supplier
No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Submit “electrical safety tester” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
Hot Products :
national electrical safety code
electrical safety in the workplace
what is electrical safety
high voltage electrical safety
rubber mat for electrical safety
rubber mat electrical safety
biomedical electrical safety analyzer
electrical safety test equipment
electrical safety switch box
drive safety digital breath alcohol tester
