1 - 10 Results for electric pole cross arm from 18885 Products
460Mpa Min Yield Stress Steel Power Pole Cross Arm ASTM A 123 Galvanization
460Mpa Min Yield Stress Electrical Power Pole , Cross Arm Galvanised Steel Poles Product Specification: Products 460Mpa Min Yield Stress Electrical Power Pole , Cross Arm Galvanised Steel Poles Application Overhead Transmission Line Project Voltage Grade 10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV, 330KV, 500KV Galvanization Hot dip galvanization in accordance with American standard ASTM A123. Marks Name palte through rivert,engrave...
Jiangsu hongguang steel pole co.,ltd
Verified Supplier
Wanshi Industrial Zone, Yixing City, Jiangsu Province, P.R. China
450Mpa Min Yield Stress Electrical Power Pole , Cross Arm Galvanised Steel Poles
450Mpa Min Yield Stress Electrical Power Pole , Cross Arm Galvanised Steel Poles Specification: Material: Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50 Yield strength of Material: Minimum yield strength>=235n/mm2 for Q235, S235 and SS400 Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50 Pole’s height: 3m –15m Length of one part Within 16m once forming without slip joint Wall thickness: 2.3mm-30mm Pole's Shape Can be made: Round,...
12m Distribution Pole Galvanized Electric Steel Power Pole Cross Arm
12m distribution pole galvanized electric Steel Power Pole cross arm Specifications: Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Lamp power 20 W- 400 W (HPS/MH) 220V (+-10%) /50Hz Torlance of the dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for...
10M-5KN To 20M-50KN Galvanized Steel Tubular Pole Cross Arm For Overhead Electrical Transmission Line
10M-5KN To 20M-50KN Steel Tubular Pole Cross Arm For Overhead Electrical Transmission Line Production Process Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles. The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality...
H.D.G Pole Cross Arm With 11 Holes Outdoor FTTH 436x40x40mm Galvanized
Description The cross-arm 11 holes is an angled bar section used for the parallel deployment of overhead lines. Installation: on non drillable poles (concrete, composite,...) on drillable poles (wooden) on pre-drilled poles (steel, concrete,...) on extension brackets (REFO,...) Our service 1, Product consulting service 2, Cost-saving advice 3, Fast response speed to needs 4, Professional and complete reference documents 5, Safe and cheap...
Geto telecommunication equipment limited company
Verified Supplier
No 1774, Rom 402, government buildings of Shicheng Town, Miyun district, Beijing City, China
10.5m - 5KN Steel Tubular Pole Cross Arm For Electrical Transmission Line
10.5m-5KN Steel Tubular Pole With Cross Arm For Electrical Transmission Line Production Process Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles. The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before...
Galvanized Power Pole Accessories 33KV 6300S Power Pole Cross Arm
33kv Galvanized Steel Power Pole Accessories 6300S Cross Arm Product Description l Product Name:33kv galvanized steel power pole accessories 6300S cross arm l Model Number: FT-CA010 l Design Standard: AASHTO (American Association of State Highway Transportation Officials) Standard l Pole Height:8-16M l Surface Treatment: Hot Dip Galvanization l Material: Q235, 355, A36, GR50,GR65 l Dimension Tolerances: +/-1% l Pole Shape: Conical, Polygonal...
Yixing Futao Metal Structural Unit Co. Ltd
Verified Supplier
No.1 Xinghe Road, Heqiao Industrial Zone, Yixing, Jiangsu, China
RAL Powder Coated Steel Electric Pole Single Arm For Wall Thickness 5mm
RAL Powder Coated Steel Electric Pole Single Arm For Wall Thickness 5mm Product Description: Products: RAL Powder Coated Steel Single Arm Street Light Poles Wall Thickness 5mm Raw Material: Q355B/A572,minimum yield strength>=355n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 Although steel company provide product quality certificate with signature and stamp indicated, we still have raw material checked in our lab test room before using the...
Jiangsu hongguang steel pole co.,ltd
Verified Supplier
Wanshi Industrial Zone, Yixing City, Jiangsu Province, P.R. China
Galvanized Transmission Power Line Pole Cross Arm For Electricity Distribution
Octagonal Transmission Electrical Power Pole For Power Distribution Line Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base...
25FT - 90FT Anticorrosive Electrical Steel Utility Poles With Cross Arm
25FT - 90FT Anticorrosive Electrical Steel Utility Poles With Cross Arm Specifications: Products 110KV Anticorrosive Electrical Steel Utility Poles with Cross Arm for Overhead Transmission Line Type Suspension Pole , Tensile Pole , Strain Pole , Angle Pole , Dead-end Pole , etc Voltage Grade 10 ~ 500KV Height 7 ~ 30m ( 25FT ~ 90FT). Shape Conical, Round, Polygonal (Octagonal, Dodecagonal, Hexadecagonal, etc),Tubular, Tapered Material Hot Roll...
Jiangsu hongguang steel pole co.,ltd
Verified Supplier
Wanshi Industrial Zone, Yixing City, Jiangsu Province, P.R. China
Submit “electric pole cross arm” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!