- Compact and robust 1 to 6 gas design.
- Full 3- Year warranty on O2, LEL, H2S, CO and COSH sensors.
- Direct reading sensors for CO2, NH3, SO2, Cl2, ClO2, NO2, NO, PH3, HF, O3 and PID for VOC measurement.
- Opetional motorized pump operates in diffusion or sample draw mode.
- Highly water resistant (IP 67).
- Top-mounted, back-lit, three color graphic display.
- Bright, flashing 360C LED alarms and loud 103 dB buzzer.
- Opetional built-in "flash light" LEDs.
- Event and datalogging standard.
Compact and Rugged design
The durable G460 continuously measures and displays readings for up
to six gases at the same time. The robust and watertight (IP 67)
housing incorporates a built-in concussion proof boot to survive
the toughest environments.
A single on-off button is all it takes for normal day-to-day
operation. A simple three button interface provides access to
advanced setup options. Calibration adjustment is completely
automatic; just attach the calibration adapter and apply gas. The
instrument automatically makes adjustments and retains the three
most recent calibration dates for each sensor.
Motorized Sampling Pump
The Motorized Pump includes a built-in slide-shutter switch that
permits operation in either diffusion or sample-draw mode while the
pump is attached. The easily attachable pump is powered by its own
battery pack that provides 20 hours of continuous sampling from up
to 100 feet away.
Widest Range of Sensors
G460 detectors are available for use with a wide range of
long-lasting, interchangeable smart-sensors for LEL, O2, H2S, CO, NH3, SO2, CL2, PH3, NO and H2. Infrared (NDIR) sensors for the direct measurement of CO2, and photoionization detectors (PID) for the measurement of volatile organic chemical (VOC) hazards are also available.
The G460 carries a lifetime warranty on non-consumable components
and a two-year warranty on consumable components. O2, LEL, H2S, CO and COSH sensors carry a full three-year warranty against failure.
Datalogging / Event Logging Standard
The G460 automatically stores complete results for the most recent
55 hours of monitoring. Any periods during which readings exceed
the alarm thresolds are stored as "events" in the permanent
on-board memory. Downloading logged information to generate reports
and graphs of your monitoring results is easy and automatic with a
simple to use data transfer cable.
Interchangeable Battery Packs
Interchangeable alkaline and rechargeable (NiMH) battery packs
provide up to 25 hours of continuous operation. The drop-in cradle
charger fully charges a depleted battery pack in less than 4 hours.
The cradle includes LEDs to indicate fast charge / trickle charge
Built-in "Flash Light" LEDs
G460 detectors can be equipped with built-in high intensity "flash
Innovative Easy-to-Read Display and Alarms
The large, easy-to-read, three-color display changes color to
indicate the severity of the alarm; the backlight color changes
from green for "OK" to orange or red for an alarm. The loud audible
alarm (103 dB at 12"), built-in vibrator and bright 360 LED alarm
indicators alert users to hazardous conditions. The backlit display
can be "flipped" 180 or "zoomed" at the push of a button for even
|Dimensions||2.5 x 4.3 x 2.0 inches (90 x 140 x 55 mm)|
|Weight||10 oz. (280 g) with O2/LEL/CO/H2S sensors, 14 oz (380 g) with IR CO2 or PID|
|Power||2 AA alkaline batteries or rechargeable NiMH pack|
|Operation Time||Up to 24 hours of continuous operation with LEL and toxic sensors;
up to 10 hours with IR CO2 or PID sensors|
|Charging Time||Less than 4 hours|
|Ambient Conditions||-4 to + 122 F (-20 + 55 C); 5-95% RH|
|Intrinsic Safety||IECE x/ATEX II 2G Ex la dc IIC T4 c-CSA-us Class 1, Div I, Groups
A, B, C, D CE (EN 89/336/EWG|