Remote Control IR Repeater/ IR Extender with 1 Receiver & 8
Emitters ( for 8 AV Devices & 1 Display ) with USB 5V adaptor
Remote Control Infrared Extender/ Infrared Repeater is a product
which amplifies the IR signal of your appliances. By connecting
this repeater to your appliances, you may be able to conceal your
appliances such as in your TV console or cabinet.
There are 3 main parts in this IR Extender/ IR Repeater namely
Infrared Emitter ( IR Emitter), Infrared Receiver ( IR Receiver )
& Infrared Transmitter.
The emitter is to be pasted on the IR point of your appliances
while the receiver is placed in a position of which it communicate
signal with your remote control. The IR transmitter box process
signal received from the Receiver and generate signals out to
Emitters which in turn to your Players/ Appliances.
High Sensitivity - Real time transmission without any delay with
its high sensitivity sensor.
CFL Friendly - This unit can be installed in an area with compact
fluorescent lighting and work in most lighting environments
Remote Indication light on IR Receiver - Green being power
connected while flashing red indicates the signal is being sent.
Broad bandwidth - With this feature, it is compatible with almost
all the electronics appliances in the market with its wide
Size - Small & Solid design
Low Power - 5V DC, 30mA max
( Note: Plasma Displays emit IR frequencies during use and may
cause interference. It is advised to distance the IR Receiver from
any Plasma TV. Ability to control multiple appliances at various
locations up to 10m. )
Connect IR Receiver to any of the 3.5mm IR ports on the IR
Transceiver box. If 2 or more IR receivers are connected, the
distance between 2 IR Receivers should not be less than 6 m to
avoid interference. ( Only 1 IR Receiver for this item )
(NoteMaximum of 6 IR Receivers can be connected to the 3 Ports of
3.5mm Jack ( on Transceiver ) by using 3.5mm Splitter cable 1 Male
to 2 Female. Three 3.5mm Splitter cables connect to transceiver to
obtain 6 ports of 3.5mm )
Remote Control from the room is achievable if the AV cable from TVs
( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e
Sharing a Player/ Appliances to watch in different rooms ) See
Insert Emitter cable to any of the Emitter Input Ports on
Transceiver box. ( OptionalMaximum of 24 emitters can be connected
to the 6 Transceiver Emitter Input Ports, using 4 Emitters head per
cable type ) ( 8 Emitters for this model BU108 )
Stick the emitter near to the IR Point of Player/ Appliances. Only
one emitter head is applicable on each Player/ Appliance
Operate the Remote Control faces the IR Receiver. Keep moving the
IR Emitter on Player/ Appliance to achieve best signal
transmission. Stick the Emitter to the point which produced the
best signal. See Picture.
Receiving Frequency Range34 KHZ to 60KHZ
Emitting Frequency Range38 KHZ to 56KHZ
Receiving Distance8 Meter
Power Consumption5VDC, 30mA max.
DimensionIR Receiver 31 (L)17 (W)13 (H)mm IR Emitter 13 (L)8 (W)5.5
IR Transceiver Box 90 (L)55 (W)26 (H) mm
Cable LengthIR Receiver 1.5m, IR Emitter 3m, USB cable 1m